RFC4150-Transport Performance Metrics MIB
Network Working GroupR. Dietz
Request for Comments: 4150;Hifn, Inc.
Category: Standards Track;;;;;R. Cole
JHU/APL
August 2005
Transport Performance Metrics MIB
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements.; Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol.; Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2005).
Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it describes managed objects used for monitoring
selectable performance metrics and statistics derived from the
monitoring of network packets and sub-application level transactions.
The metrics can be defined through reference to existing IETF, ITU,
and other standards organizations" documents.; The monitoring covers
both passive and active traffic generation sources.
Table of Contents
1. The Internet-Standard Management Framework ......................2
2. Overview ........................................................2
2.1. Terms ......................................................5
2.2. Report Aggregation .........................................5
2.3. StrUCture of the MIB .......................................6
2.4. Statistics for Aggregation of Data: Conventions ............7
2.5. Relationship to the Remote Monitoring MIB ..................7
2.6. Relationship to RMON2-MIB Protocol Identifier Reference ....7
2.7. Relationship to Standards-Based Performance Metrics ........7
2.8. Relationship to Application Performance Measurement MIB ....8
3. Statistics Perspective ..........................................8
3.1. Statistics Structure ......................................10
3.2. Statistics Analysis .......................................11
4. Definitions ....................................................11
5. Acknowledgements ...............................................51
6. Security Considerations ........................................52
7. Normative References ...........................................53
8. Informative References .........................................54
1.; The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are Accessed via a virtual information store, termed
the Management Information Base or MIB.; MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI).; This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580].
2.; Overview
This document continues the architecture created in the RMON2-MIB
[RFC2021] by providing a major feature upgrade, primarily by
providing new metrics and studies to assist in the analysis of
performance for sub-application transaction flows in the network, in
direct relationship to the transport of application layer protocols.
Performance-monitoring agents have been widely used to analyze the
parameters and metrics related to the perceived performance of
distributed applications and services in networks.; The metrics
collected by these agents have ranged from basic response time to a
combination of metrics related to the loss and re-transmission of
datagrams and PDUs.; Although the metrics are becoming more useful in
the implementation of service-level monitoring and troubleshooting
tools, the lack of a standard method to report these has limited the
deployment to very specific customer needs and areas.
This document is intended to create a general framework for the
collection and reporting of performance-related metrics on sub-
application level transaction flows in a network.; The MIB in this
document is directly linked to the current RMON2-MIB [RFC2021], and
uses the Protocol Directory as a key component in reporting the
layering involved in the sub-application level transaction flows.
The specific objectives of this document are to:
+ Provide a drill-down capability to complement the user-perceived
monitoring defined within the Application Performance
Measurement MIB (APM-MIB) [RFC3729].; This capability is
intended to support trouble resolution, further characterization
of performance, and a finer granularity of monitoring
capabilities.; The APM-MIB provides a method for retrieving
aggregated measurement data of the end-user"s perception of
application-level performance.; APM additionally provides
thresholding and associated alarms if the end-user perceived
performance degrades below defined thresholds.; The Transport
Performance Metrics MIB (TPM-MIB) complements the APM-MIB
capabilities by monitoring sub-application level transaction
ASPects not typically perceived by the end-user.; As an example,
APM-MIB provides response time statistics of a typical web-
;;;;;browser application.; This application typically consists of DNS
transactions, TCP connection establishment (or multiple
establishments), HTTP download of the base page, and multiple
downloads of the various embedded objects.; Ideally, TPM-MIB
would provide statistics on the performance aspects of these
multiple sub-application level transactions.
+ Provide additional performance metrics and related statistics.
For troubleshooting and a finer granularity of performance
monitoring, it is useful to provide measurements of additional
metrics beyond those supported by the APM-MIB.
+ Support standards-based metrics and associated statistical
aggregation by defining methods to reference those standards.
The TPM-MIB provides a capability to describe metrics by
reference to appropriate IETF, ITU, or other standards bodies
defining metrics, including enterprise-specific standards
bodies.; This capability is provided through the
tpmMetricsDefTable.
Specifically, this MIB itself does not make references to metric
specifications of the IETF, ITU and other organizations.
Instead, it allows for the setup of the tpmMetricDefTable that
does reference such IETF, ITU, and other metric specifications,
and it allows pointers to such specifications to be dynamically
listed in this table.; The following objects allow for that, and
the DESCRIPTION clauses (of the objects below) eXPlain how this
is done:
tpmMetricDefName OBJECT-TYPE
tpmMetricDefReference OBJECT-TYPE
tpmMetricDefGlobalID OBJECT-TYPE
The tpmMetricDefGlobalID object contains a reference to the
;;;;;Object ID in a metrics registration MIB being developed in the
IP Performance Metrics (IPPM) Working Group at the IETF; e.g.,
the IPPM-REGISTRY-MIB [RFC4148], which defines the metric.; For
metrics defined within the IPPM Working Group, which are
included in the IPPM-REGISTRY-MIB, this object is used to
reference those metrics directly.; For metrics not included
within the IPPM-REGISTRY-MIB, the value of this object is set
to 0.0 for none.
Examples of appropriate references include the ITU-T
Recommendation Y.1540 [Y.1540] on IP packet transfer performance
metrics, and the IETF documents from the IPPM WG; e.g., RFC 2681
on the round trip delay metric [RFC2681] or RFC3393 on the delay
variation metric [RFC3393].; Others include RFC 2679 [RFC2679],
RFC2680 [RFC2680], and RFC3432 [RFC3432].; Although no specific
metric is mandatory, implementations should, at a minimum,
support a round-trip delay and a round-trip loss metric.
+ Provide (as an option) a table storing the measurements of the
metrics on a transaction by transaction basis.; There are times
when it is useful to have access to the raw measurements.; The
tpmCurReportTable optionally provides access to this capability.
Although this document outlines the basic measurements of performance
in regard to the transport of application flows, it does not attempt
to measure or provide a means to measure the actual perceived
performance of the application transactions or quality.; The detailed
measurements of end-user-perceived performance are directly related
to this document and may be found in the APM-MIB [RFC3729].
The objects defined in this document are intended as an interface
between an RMON agent and an RMON management application and are not
intended for direct manipulation by humans.; Although some users may
tolerate the direct display of some of these objects, few will
tolerate the complexity of manually manipulating objects to
accomplish row creation.; These functions should be handled by the
management application.
2.1.; Terms
This document uses some terms that need introduction:
DataSource
A source of data for monitoring purposes.; This term is used
exactly as defined in the RMON2-MIB [RFC2021].
protocol
A specific protocol encapsulation, as identified for monitoring
purposes.; This term is used exactly as defined in the RMON
Protocol Identifiers document [RFC2895].
performance metric
A specific, measured reporting metric, as identified for
monitoring purposes.; There can be several metrics reported by
an agent in the same implementation.; The metrics are extensible
based on the agent implementation.
application
A network-based, high-level protocol performing useful work to
an end-user of an end-system.; Typically, the application
performs multiple request/response transactions to complete its
work.; E.g., a web application downloading a web page completes
DNS, TCP-connect, and multiple HTTP GET transactions prior to
completing its task.
transactions
Elemental request/response transactions comprising more complex
network-based applications.; E.g., a transaction may include an
FTP get request and the file download in response.
2.2.; Report Aggregation
This MIB module provides functions that aggregate measurements into
higher-level summaries identical to the aggregation defined in the
APM-MIB [RFC3729].; In addition to temporal aggregation of data, the
Textual Convention, TransactionAggregationType, is imported from the
APM-MIB, which specifies the nature of the spatial aggregation
employed.
2.3.; Structure of the MIB
The objects are arranged in the following groups:
-- tpmCapabilitiesGroup
-- tpmAggregateReportsGroup
-- tpmCurrentReportsGroup
-- tpmExceptionReportsGroup
These groups are the basic units of conformance.; If an agent
implements a group, then it must implement all objects in that group.
Although this section provides an overview of grouping and
conformance information for this MIB module, the authoritative
reference for such information is contained in the MODULE-COMPLIANCE
and OBJECT-GROUP macros later in this MIB module.
These groups are defined to provide a means of assigning object
identifiers, and to provide a method for implementers of managed
agents to know which objects they must implement.
2.3.1.; The tpmCapabilitiesGroup
The tpmCapabilitiesGroup contains objects and tables that show the
measurement protocol and metric capabilities of the agent.; This
group primarily consists of the tpmTransMetricDirTable and the
tpmMetricDefTable.
2.3.2.; The tpmAggregateReportsGroup
The tpmAggregateReportsGroup is used to provide the collection of
aggregated statistical measurements for the configured report
intervals.; The tpmAggregateReportsGroup consists of the
tpmAggrReportCntrlTable and the tpmAggrReportTable.
2.3.3.; The tpmCurrentReportsGroup
The tpmCurrentReportsGroup is used to provide the collection of
uncompleted measurements for the current configured report for those
transactions caught in progress.; A history of these transactions is
also maintained once the current transaction has been completed.; The
tpmCurrentReportsGroup consists of the tpmCurReportTable and the
tpmCurReportSize object.
2.3.4.; The tpmExceptionReportsGroup
The tpmExceptionReportsGroup is used to link immediate notifications
of transactions that exceed certain thresholds defined in the
apmExceptionGroup [RFC3729].; This group reports the aggregated sub-
application measurements for those applications exceeding thresholds.
The tpmExceptionReportsGroup consists of the tpmExcpReportTable.
2.4.; Statistics for Aggregation of Data: Conventions
In order to measure the performance of traffic flows in a network,
the proper analysis of a set of statistics is required.; Because a
large majority of the statistics have a basis of time, the use of a
simple statistical model is feasible.; Therefore, the MIB definitions
within this document all use a basic set of statistical computed
values to assist in further analysis by a management application.
The remaining subsections in this section detail the common
structured features the are applied to the performance metrics in the
statistical format described above.; The tpmMetricsDefTable
(discussed below) describes the set of metrics supported in this MIB
module.
2.5.; Relationship to the Remote Monitoring MIB
This document describes the implementation of an additional MIB for
the support of performance-related metrics within the framework of
the RMON2-MIB [RFC2021].; The objects and table defined in this MIB
module are an extension to the existing framework for the support of
both Client/Server and Server push-related applications and services.
2.6.; Relationship to RMON2-MIB Protocol Identifier Reference
This document uses the Protocol Identifiers outlined in the current
Protocol Identifier Reference document, RFC 2895 [RFC2895].; The
protocol index values throughout the document are a direct reference
to the same relationship that exists between the RMON2-MIB [RFC2021]
and the Protocol Identifier Reference document, RFC 2895 [RFC2895].
An important extension of the Protocol Identification to application-
level verbs is found in RFC 3395 [RFC3395].
2.7.; Relationship to Standards-Based Performance Metrics
This document uses the tpmMetricsDefTable to describe the metrics
supported by an instance of the TPM-MIB.; The performance metric
index values throughout the document are a direct reference to the
metrics defined in that table.; The table defines metrics by directly
referencing other standards that provide definitive descriptions of
the metric.
2.8.; Relationship to Application Performance Measurement MIB
This document uses the apmReportControlIndex, appLocalIndex, and
apmReportIndex, as outlined in the current Application Performance
Measurement MIB [RFC3729].; These objects are used to create a
reference link for the purpose of reporting transaction flow details
on application-level measurements.; As such, the TPM-MIB is designed
to provide a drill-down extension to the APM-MIB.; Further, it draws
heavily on the ideas and designs laid out in the APM-MIB.
3.; Statistics Perspective
When dealing with time-based measurements on application data
packets, ideally all the timestamps and related data could be stored
and forwarded for later analysis.; However, when faced with thousands
of conversations per second on ever-faster networks, storing all the
data, even if compressed, would take too much processing, memory, and
manager download time to be practical.
It is important to note that in dealing with network data we will be
dealing with statistical populations and not samples.; Statistics
books deal with both because the math is similar.; In collecting
agent data, a population (i.e., all the data) must be processed.
Because of the nature of application protocols, just sampling some of
the packets will not give good results.; Missing just one critical
packet, such as one that specified an ephemeral port on which data
will be transmitted or what application will be run, can cause much
valid data to be lost.
The time-based measurements the agent collects will come from
examining the entire group of data, i.e., the population.; The
population will be finite.; The agent will seek only to provide
information that will describe the actual data.; Analysis of that
data will be left to the management station.
The simplest form of representing a group of data is by frequency
distributions, i.e., buckets.; Statistics provides a great many ways
of analyzing this type of data, and there are some rules in creating
the buckets.; First, the range needs to be known.; Second, a bucket
size needs to be determined.; Fixed bucket sizes are best, although
variable may be used if needed.; However, the statistics texts tend
only to refer to operations of fixed-size buckets.; This method of
describing data is expensive for an agent to implement.; First, the
agent must process a great amount of data at a time.; Storing the
data, determining the range, locating the buckets, and then filling
in the data after the fact takes a fair amount of storage and time.
Fixing the range and bucket sizes in the beginning can be
problematic, as the agent may have to adjust the values for each of
the applications it collects data on.; Such numbers can be in the
thousands.; Additional complexity arises in adding new protocols and
even in describing the buckets themselves to the management
application.; This is the approach taken in the APM-MIB.
A complimentary approach is to provide frequency distribution
statistics.; They describe aggregation such as mean and standard
deviation that can be oBTained by summation functions on the
individual data elements in a population.; Analysis of the data
described by these functions has been thoroughly studied, and
interpretation of these values is available to anyone with an
introduction to statistics.; In fact, frequency distributions are
routinely analyzed to generate these varied numbers, which are then
used for further analysis.; Note that frequency distributions, by
their very nature, provide an exact characterization of the data.
Whereas buckets will introduce error factors that are not present
with direct analysis by summation-type formulas.; Because the TPM-MIB
provides a drill-down capability to the APM MIB, it has to measure
and store much more information than the APM-MIB.; For this reason,
and in order to complement the APM-MIB, the TPM-MIB relies on
statistical descriptions rather than a bucket description of the
measurement data.
The agent will provide data that can be used to calculate the most
basic and useful statistical aggregates.; The agent will not perform
the calculations and will not provide the statistical measurement
directly.; There are several reasons why this is not desired.; The
first is that finding the final measurement can be expensive in terms
of computation and representation.; There are divisions and square
roots, and the measurements are expressed as floating point values.
The second is that by providing the variables to the statistical
functions, those variables are scalable.; It is possible to combine
smaller intervals into larger ones.
An example is the arithmetic mean or average.; This is the sum of the
data divided by the number of data elements.; The agent will provide
the sum of the x and the number of elements N.; The management
station can perform the division to obtain the average.; Given two
samples, they can be combined by adding the sum of the x"s and by
adding the number of elements to get a combined sum and number of
elements.; The average formula then works just the same.; Also, the
sum of the x and the number of element variables are used in
calculating other statistical measurement values.
3.1.; Statistics Structure
The data statistical elements, datum, of the metric have been chosen
to maximize the amount of data available while minimizing the amount
of memory needed to store the statistic and minimizing the CPU
processing requirement needed to generate the statistic.
The statistic data structure contains five unsigned integer datum.
N;;;;;count of the number of data points for the metric
;;;;S(X);;sum of all the data point values for the metric
S(X2);sum of all the data point values squared for the metric
Xmax;;maximum data point value for the metric
Xmin;;minimum data point value for the metric
S(I*X)sum of the data points multiplied by their order, i.e.,
= SUM from i=1 to N { i*X sub i}
A performance metric is used to describe events over a time interval.
The measurement points can be processed immediately into the
statistic and do not have to be stored for later processing.; For
example, to count the number of events in a time interval, it is
sufficient to increment a counter for each event.; It is not
necessary to cache all the events and then to count them at the end
of the interval.; The statistic is also designed to be easily
scalable in terms of combining adjacent intervals.; For example, if
an agent created a specific statistic every 30 seconds and a user
table interval was set to 60 seconds, the 60-second statistic could
be obtained by combining the two 30-second statistics.; The following
rules will be applied when combining adjacent statistics.
N S(N)
S(X);;;S(S(X))
S(X2);;S(S(X2))
Xmax;;;MAX(Xmax)
Xmin;;;MIN(Xmin)
S(I*X);S(I*X) + N*S(X) +S(I*X)
where the last two terms refer to the
statistics from the later 30 second period
and N is the count from the former 30 second
period.
This structure gives a generic framework upon which the actual
performance statistics will be defined.; Each specific statistical
definition must address the specific significance, if any, given to
each metric datum.; While a specific metric definition should try to
conform to the generic framework, it is acceptable for a metric datum
to not be used, and to have no meaning, for a specific metric.; In
such cases the datum will default to a 0 value.
3.2.; Statistics Analysis
The actual meaning of a specific statistical datum is determined by
the definition of the specific statistic.; The following is a
discussion of the operations and observations that can be performed
on a generic metric.; This means that the following may or may not
apply and/or have meaning when applied to any specific metric.
The following observations and analysis techniques are not all
inclusive.; Rather these are the ones we have come up with at the
time of writing this document.
+ Number.
+ Frequency.
+ The time interval is that specified in the control table.; It
is not a metric datum, but it is associated with the metric
sample.
+ Maximum
+ Minimum
+ Range
+ Arithmetic Mean
+ Root Mean Square
+ Variance
+ Standard Deviation
+ Slope of a least-squares line
These are accessible from the statistical datum provided by this MIB
module.
4.; Definitions
--
-- RMON2-MIB extensions for the monitoring metrics related to the
-- performance of transporting traffic in networks.
--
--;TPM Metric Collection
--;;;;;* Application-to-Protocol transaction linkage
--;;;;;* Metric-to-Protocol linkage
--;;;;;* Metric study control
--;;;;;* Metrics for Client/Server Conversations
--
TPM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Counter32, Unsigned32 FROM SNMPv2-SMI;--[RFC2578]
MODULE-COMPLIANCE,
;;;;OBJECT-GROUP; FROM SNMPv2-CONF--[RFC2580]
SnmpAdminString;;;;FROM SNMP-FRAMEWORK-MIB --[RFC3411]
RowStatus, TEXTUAL-CONVENTION, TimeStamp,
StorageTypeFROM SNMPv2-TC; --[RFC2579]
rmon, OwnerString;;FROM RMON-MIB--[RFC2819]
protocolDirLocalIndex,
ZeroBasedCounter32;FROM RMON2-MIB; --[RFC2021]
ZeroBasedCounter64;FROM HCNUM-TC; --[RFC2856]
AppLocalIndex, TransactionAggregationType,
RmonClientID, DataSourceOrZero,
apmAppDirAppLocalIndex, apmExceptionIndex,
apmReportGroup, apmExceptionGroup,
apmAppDirResponsivenessTypeFROM APM-MIB--[RFC3729]
SspmClockSource, SspmClockMaxSkew,
SspmMicroSeconds;;;FROM SSPM-MIB--[RFC4149]
-- Transaction Performance Monitoring MIB
tpmMIB MODULE-IDENTITY
LAST-UPDATED;"200507280000Z"; -- 28 July 2005
ORGANIZATION;"IETF RMON MIB Working Group"
CONTACT-INFO
"E-mail: rmonmib@ietf.org
Subscribe: rmonmib-request@ietf.org
w/ msg body: subscribe rmonmib
Russell Dietz
Hifn, Inc.
;;Postal: 750 University Ave
Los Gatos, CA 95032-7695
USA
Tel: +1 408 399-3623
Fax: +1 408 399-3501
E-mail: rdietz@hifn.com
Robert G. Cole
Johns Hopkins University Applied Physics Laboratory
Postal: MP2-170
11100 Johns Hopkins Road
Laurel, MD 20723-6099
USA
Tel: +1 443 778-6951
E-mail: robert.cole@jhuapl.edu"
DESCRIPTION
"This module defines extensions to the RMON2-MIB module
for the collection of Performance Metrics related to
application traffic in a network.; In particular,
it describes managed objects used for monitoring
selectable performance metrics and statistics
derived from the monitoring of network packets and
sub-application level transactions.
In order to maintain the RMON "look-and-feel", some of
the text from the RMON2 [RFC2021] and HC-RMON [RFC3273]
;;MIBs by Steve Waldbusser have been used in this MIB module.
Copyright (C) The Internet Society (2005).; This version of
this MIB module is part of RFC 4150; see the RFC itself for
full legal notices."
REVISION;;;;;"200507280000Z"-- 28 July 2005
DESCRIPTION
"The original version of this MIB module,
published as RFC 4150."
::= { rmon 30 }
--
-- Object Identifier Assignments
--
tpmCapabilities OBJECT IDENTIFIER ::= { tpmMIB 1 }
tpmReports;;;OBJECT IDENTIFIER ::= { tpmMIB 2 }
tpmConformance; OBJECT IDENTIFIER ::= { tpmMIB 3 }
-- tpmAggrReportCntrlTable OBJECT IDENTIFIER ::= { tpmReports 1 }
-- tpmAggrReportTable;;;OBJECT IDENTIFIER ::= { tpmReports 2 }
-- tpmCurReportTable;;;;OBJECT IDENTIFIER ::= { tpmReports 3 }
-- tpmCurReportSize;;;;;OBJECT IDENTIFIER ::= { tpmReports 4 }
-- tpmExcpReportTable;;;OBJECT IDENTIFIER ::= { tpmReports 5 }
--
-- Textual Conventions
--
TpmTransactionMetricIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS;;;;current
DESCRIPTION
"An index used to identify an entry in the
tpmTransMetricDir table uniquely.; Each such entry defines
the protocol transaction and metric instance to be
monitored for a specific application."
SYNTAX;;;;Unsigned32 (1..65535)
TpmMetricDefID ::= TEXTUAL-CONVENTION
;;;;DISPLAY-HINT "d"
STATUS;;;;current
DESCRIPTION
"An index that identifies through reference to a specific
performance metrics.; The metrics are referenced
through their type (connect, delay, loss, etc.), their
directional characteristics (one-way, round trip, etc.),
their name, and their reference to a documented definition."
SYNTAX;;;;Unsigned32 (1..2147483647)
--
-- The tpmCapabilitiesGroup
--
tpmClockResolution OBJECT-TYPE
SYNTAX;;;SspmMicroSeconds
MAX-ACCESS; read-only
STATUS;;;current
-- UNITS;;;;Microseconds
DESCRIPTION
"A read-only variable indicating the resolution
of the measurements possible by this device."
::= { tpmCapabilities 1 }
tpmClockMaxSkew OBJECT-TYPE
SYNTAX;;;SspmClockMaxSkew
MAX-ACCESS; read-only
STATUS;;;current
-- UNITS;;;;Seconds
DESCRIPTION
"A read-only variable indicating the maximum
offset error due to skew of the local clock
over the time interval 86400 seconds, in seconds."
::= { tpmCapabilities 2 }
tpmClockSource OBJECT-TYPE
SYNTAX;;;SspmClockSource
MAX-ACCESS; read-only
STATUS;;;current
DESCRIPTION
"A read-only variable indicating the source of the clock.
;This is provided to allow a user to determine how accurate
the timing mechanism is compared with other devices."
::= { tpmCapabilities 3 }
tpmTransMetricDirLastChange OBJECT-TYPE
SYNTAX;;;TimeStamp
MAX-ACCESS; read-only
STATUS;;;current
DESCRIPTION
"The value of sysUpTime at the time the
tpmTransMetricDirTable was last modified, through
modifications of the tpmTransMetricDirConfig object."
::= { tpmCapabilities 4 }
tpmTransMetricDirTable OBJECT-TYPE
SYNTAX;;;SEQUENCE OF TpmTransMetricDirEntry
MAX-ACCESS; not-accessible
STATUS;;;current
DESCRIPTION
"This table is used to describe and link sets of
performance metrics and protocols to an entry in
the application directory.; This table, with the
tpmMetricDefTable, describes the capability of
the agent to collection sub-application level
data related to each entry in the
apmAppDirectoryTable.
This table lists the protocol transactions and their
corresponding performance metrics that this agent
has the capability to compute and collect, for the specified
application.; There is one entry in this table for each such
application, protocol transaction, and metric combination
supported by this agent.; The entries in this
table represent the metrics that are collected for each
protocol transaction that comprise the application.
The agent should boot up with this table pre-configured
with those combinations of applications, protocol
transactions, and metrics that it knows about and wishes to
monitor.; Implementations must populate the table with all
possible application, protocol transaction, and metric
combinations and have the default configuration objects
set to supportedOff(2).; This table does not support the
creation of new combinations by the management application.
The deletion of an entry in the apmAppDirectoryTable will
cause the removal of entries from this table.; These entries
must be removed because the appLocalIndex value will no
longer be visible in the apmAppDirectoryTable.; When an entry
is created in the apmAppDirectoryTable and the agent has the
ability to support metrics for these protocol transactions,
the appropriate entries must be made in the
tpmTransMetricDefTable."
::= { tpmCapabilities 5 }
tpmTransMetricDirEntry OBJECT-TYPE
SYNTAX;;;TpmTransMetricDirEntry
MAX-ACCESS; not-accessible
STATUS;;;current
DESCRIPTION
"A conceptual row in the tpmTransMetricDirTable.
An example of the indexing of this entry is
tpmTransMetricDirConfig.5.2; where 5 is the
value of a valid and visible appLocalIndex object
in the appLocalDir table.; The entries describe
the transaction and metric pairs monitored for this
application.; The tpmTransMetricProtocolIndex
identifies the protocol transaction and the
tpmMetricDefIndex describes the metric monitored."
INDEX { tpmTransMetricAppLocalIndex, -- Application Index
tpmTransMetricIndex;-- (Protocol,Metric) Index
}
::= { tpmTransMetricDirTable 1 }
TpmTransMetricDirEntry ::= SEQUENCE {
tpmTransMetricAppLocalIndexAppLocalIndex,
tpmTransMetricIndexTpmTransactionMetricIndex,
tpmTransMetricProtocolIndexUnsigned32,
tpmTransMetricMetricIndex;;Unsigned32,
tpmTransMetricDirConfig;;;;INTEGER
}
tpmTransMetricAppLocalIndex OBJECT-TYPE
SYNTAX;;;AppLocalIndex
MAX-ACCESS; not-accessible
STATUS;;;current
DESCRIPTION
"An index used to uniquely identify the application
with which the entries in the tpmTransMetricDir
table are associated."
::= { tpmTransMetricDirEntry 1 }
tpmTransMetricIndex OBJECT-TYPE
SYNTAX;;;TpmTransactionMetricIndex
MAX-ACCESS; not-accessible
STATUS;;;current
DESCRIPTION
"An index used to uniquely identify an entry in the
tpmTransMetricDir table.; Each such entry defines
protocol transaction and metric instance
to be monitored for a specific application."
;;;;::= { tpmTransMetricDirEntry 2 }
tpmTransMetricProtocolIndex OBJECT-TYPE
SYNTAX;;;Unsigned32 (1..2147483647)
MAX-ACCESS; read-only
STATUS;;;current
DESCRIPTION
"The protocolDirLocalIndex of the particular transaction to
be analyzed when computing and generating the selected metric
for a specific application."
::= { tpmTransMetricDirEntry 3 }
tpmTransMetricMetricIndex OBJECT-TYPE
SYNTAX;;;Unsigned32 (1..2147483647)
MAX-ACCESS; read-only
STATUS;;;current
DESCRIPTION
"The tpmMetricDefinitionID of the particular metric to be
generated."
::= { tpmTransMetricDirEntry 4 }
tpmTransMetricDirConfig OBJECT-TYPE
SYNTAX;;;INTEGER {
notSupported(1),
supportedOff(2),
supportedOn(3)
}
MAX-ACCESS; read-write
STATUS;;;current
DESCRIPTION
"This object describes and configures the probe"s support
for this performance metric in relationship to the
specified transaction and application.; The agent
creates entries in this table for all metric
and transaction combinations that it can generate.; Because
the probe will only populate this table with supported
entries, and the table cannot have entries added, the
notSupported(1) setting is only used to signify that other
configuration parameters are causing the agent currently not
to support the generation and collection of this metric for
the specified protocol and application.; Also, the status of
this object will not change to notSupported(1) due to a
change to supportedOff(2) in the tpmMetricDir table.
If the value of this object is notSupported(1), the probe
will not perform computations for this performance metric and
transaction combination and will not allow this object to be
changed to any other value.; If the value of this object is
supportedOn(3), the probe supports computations for this
performance metric and protocol and is configured to perform
the computations for this performance metric and protocol
combination for the application for all interfaces.
If the value of this object is supportedOff(2), the
probe supports computations for this performance
metric for the specified protocol, but is configured
not to perform the computations for this performance
metric and protocol for the application for any
interfaces.; Whenever this value changes from
supportedOn(3) to supportedOff(2), the probe shall
cause the deletion of all entries in the tpmReportGroup
tables, for all appropriate studies configured in the
tpmAggrReportCntrlTable.
The value of this object must persist across reboots."
::= { tpmTransMetricDirEntry 5 }
--
-- TPM Metric Definitions Table
--
tpmMetricDefTable OBJECT-TYPE
SYNTAX;;;SEQUENCE OF TpmMetricDefEntry
MAX-ACCESS; not-accessible
STATUS;;;current
DESCRIPTION
"The tpmMetricDefTable describes the metrics
available to the TPM-MIB.; The tpmMetricDefTable
can define metrics by referencing existing IETF,
ITU, and other standards organizations" documents,
including enterprise-specific documents.
Examples of appropriate references include the
ITU-T Recommendation Y.1540 [Y.1540] on IP
packet transfer performance metrics and the
IETF documents from the IPPM WG; e.g., RFC2681
on the round trip delay metric [RFC2681] or
RFC3393 on the delay variation metric [RFC3393].
Other examples include RFC2679 [RFC2679], RFC2680
[RFC2680], and RFC3432 [RFC3432].; Although no
specific metric is mandatory, implementations
should, at a minimum, support a round-trip delay
and a round-trip loss metric.
This table contains one row per metric supported by this
agent, and it should be populated during system
initialization."
::= { tpmCapabilities 6 }
tpmMetricDefEntry OBJECT-TYPE
SYNTAX;;;TpmMetricDefEntry
;;;;MAX-ACCESS; not-accessible
STATUS;;;current
DESCRIPTION
"Information about a particular metric."
INDEX{ tpmMetricDefinitionID }
::= { tpmMetricDefTable 1 }
TpmMetricDefEntry ::= SEQUENCE {
tpmMetricDefinitionID;;;TpmMetricDefID,
tpmMetricDefTypeINTEGER,
tpmMetricDefDirType;;;;;INTEGER,
tpmMetricDefNameSnmpAdminString,
tpmMetricDefReference;;;SnmpAdminString,
tpmMetricDefGlobalID;;;;OBJECT IDENTIFIER
}
tpmMetricDefinitionID;;OBJECT-TYPE
SYNTAX;;;TpmMetricDefID
MAX-ACCESS; not-accessible
STATUS;;;current
DESCRIPTION
"The index for this entry.; This object identifies
the particular metric in this MIB module."
::= { tpmMetricDefEntry 1 }
tpmMetricDefTypeOBJECT-TYPE
SYNTAX;;;INTEGER; {
other(1),
connectMetric(2),
delayMetric(3),
lossMetric(4)
}
MAX-ACCESS; read-only
STATUS;;;current
DESCRIPTION
"The basic type of metric indicated by this entry.
The value "other(1)" indicates that this metric cannot be
characterized by any of the remaining enumerations specified
for this object.
The value "connectMetric(2)" indicates that this metric
measures connectivity characteristics.
The value "delayMetric(3)" indicates that this metric
measures delay characteristics.
The value "lossMetric(4)" indicates that this metric
measures loss characteristics."
::= { tpmMetricDefEntry 2 }
tpmMetricDefDirTypeOBJECT-TYPE
SYNTAX;;;INTEGER; {
oneWay(1),
twoWay(2),
multiWay(3)
}
MAX-ACCESS; read-only
STATUS;;;current
DESCRIPTION
"The directional characteristics of the this metric.
The value "oneWay(1)" indicates that this metric is measured
with some sort of unidirectional test.
The value "twoWay(2)" indicates that this metric is measured
with some sort of bidirectional test.
The value "multiWay(3)" indicates that this metric is
measured with some combination of unidirectional and/or
bidirectional tests."
::= { tpmMetricDefEntry 3 }
tpmMetricDefName OBJECT-TYPE
SYNTAX;;;SnmpAdminString
MAX-ACCESS; read-only
STATUS;;;current
DESCRIPTION
"The textual name of this metric.; For example, if
this tpmMetricDefEntry identified the IPPM metric for
round trip delay, then this object should contain
the value, e.g., "Type-P-Round-Trip-Delay"."
::= { tpmMetricDefEntry 4 }
tpmMetricDefReference OBJECT-TYPE
SYNTAX;;;SnmpAdminString
MAX-ACCESS; read-only
STATUS;;;current
DESCRIPTION
"This object contains a reference to the document that
defines this metric.; If this document is available online
via electronic download, then a de-referencable URL
should be specified in this object.; The implementation
must support an HTTP URL type and may support additional
types of de-referencable URLs such as an FTP type.
For example, if this tpmMetricDefName identified the IPPM
metric "Type-P-Round-Trip-Delay", then this object should
contain the value, e.g.,
"http://www.ietf.org/rfc/rfc2681.txt"."
::= { tpmMetricDefEntry 5 }
tpmMetricDefGlobalID OBJECT-TYPE
;;;;SYNTAX;;;OBJECT IDENTIFIER
MAX-ACCESS; read-only
STATUS;;;current
DESCRIPTION
"This object contains a reference to the Object ID
in a metrics registration MIB being developed
in the IPPM WG at the IETF; e.g., the
IPPM-REGISTRY-MIB [RFC4148], which defines the metric.
In the event that this metric has no corresponding
object identifier (OID) or until the IPPM-REGISTRY-MIB is
defined, then the value should be set to 0.0 for none."
::= { tpmMetricDefEntry 6 }
--
-- The tpmAggregateReportsGroup
--
tpmAggrReportCntrlTable OBJECT-TYPE
SYNTAX;;;SEQUENCE OF TpmAggrReportCntrlEntry
MAX-ACCESS; not-accessible
STATUS;;;current
DESCRIPTION
"The tpmAggrReportCntrlTable is the controlling entry
that manages the population of studies in the Transport
Aggregate Report for selected interfaces, metrics, and
transaction protocols and applications.
Note that this is not like the typical RMON
controlTable and dataTable in which each entry creates
its own data table.; Each entry in this table enables the
creation of multiple data tables on a study basis.; For each
interval, the study is updated in place, and the current
data content of the table becomes invalid.
The control table entries are persistent across
system reboots."
;;;;::= { tpmReports 1 }
tpmAggrReportCntrlEntry OBJECT-TYPE
SYNTAX;;;TpmAggrReportCntrlEntry
MAX-ACCESS; not-accessible
STATUS;;;current
DESCRIPTION
"A conceptual row in the tpmAggrReportCntrlTable.
An example of the indexing of this entry is
tpmAggrReportCntrlDataSource.1"
INDEX { tpmAggrReportCntrlIndex }
::= { tpmAggrReportCntrlTable 1 }
TpmAggrReportCntrlEntry ::= SEQUENCE {
tpmAggrReportCntrlIndex;;;;Unsigned32,
tpmAggrReportCntrlApmCntrlIndex;;;;Unsigned32,
tpmAggrReportCntrlDataSource; DataSourceOrZero,
tpmAggrReportCntrlAggrType;TransactionAggregationType,
tpmAggrReportCntrlInterval;Unsigned32,
tpmAggrReportCntrlReqSize;;Unsigned32,
tpmAggrReportCntrlGrantedSize Unsigned32,
tpmAggrReportCntrlReqReports; Unsigned32,
tpmAggrReportCntrlGrantedReports;;;Unsigned32,
tpmAggrReportCntrlStartTimeTimeStamp,
tpmAggrReportCntrlReportNumber;;;;;Unsigned32,
tpmAggrReportCntrlInsertsDenied;;;;Counter32,
tpmAggrReportCntrlDroppedFrames;;;;Counter32,
tpmAggrReportCntrlOwner;;;;OwnerString,
tpmAggrReportCntrlStorageType StorageType,
;;;;tpmAggrReportCntrlStatus;;;RowStatus
}
tpmAggrReportCntrlIndex OBJECT-TYPE
SYNTAX;;;Unsigned32 (1..65535)
MAX-ACCESS; not-accessible
STATUS;;;current
DESCRIPTION
"An index that uniquely identifies an entry in the
tpmAggrReportCntrlTable.; Each such entry defines a unique
report whose results are placed in the tpmAggrReportTable on
behalf of this tpmAggrReportCntrlEntry."
::= { tpmAggrReportCntrlEntry 1 }
tpmAggrReportCntrlApmCntrlIndex OBJECT-TYPE
SYNTAX;;;Unsigned32 (0..65535)
MAX-ACCESS; read-create
STATUS;;;current
DESCRIPTION
"This index associates this TpmAggrReportCntrlEntry directly
with an existing ApmReportControlEntry.; This link is used
to synchronize reports in the associated tpmAggrReportTable.
A value of 0 (zero) enables an independent control table that
will report entries to tpmAggrReportTable based only on the
other objects in this table.
A non-zero value indicates that this row is defined through
the APM-MIB.; In this case, all row objects are set to their
corresponding values in the APM-MIB.; In the event that a
SET is issued to a row object, while the value of the
tpmAggrReportCntrlApmCntrlIndex is non-zero, the agent
MUST respond as if the object of the SET command
had MAX-ACCESS of read-only.
This object may not be modified if the associated
tpmAggrReportCntrlStatus object is equal to active(1)."
DEFVAL { 0 }
::= { tpmAggrReportCntrlEntry 2 }
tpmAggrReportCntrlDataSource OBJECT-TYPE
SYNTAX;;;DataSourceOrZero
MAX-ACCESS; read-create
STATUS;;;current
DESCRIPTION
"The source of the data for TPM Reports generated on
behalf of this tpmAggrReportCntrlEntry.
If the measurement is being performed by a probe, this should
be set to the interface or port where data was received for
analysis.; If the measurement isn"t being performed by a
probe this should be set to the primary interface over which
the measurement is being performed.; If the measurement isn"t
being performed by a probe and there is no primary interface,
or if this information isn"t known, this object should be
set to 0.0.
If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
then this object is set to the corresponding
apmReportControlTable object in the APM-MIB [RFC3729].
This object may not be modified if the associated
tpmAggrReportCntrlStatus object is equal to active(1)."
::= { tpmAggrReportCntrlEntry 3 }
tpmAggrReportCntrlAggrType OBJECT-TYPE
SYNTAX;;;TransactionAggregationType
-- INTEGER {
--;flows(1),
--;clients(2),
--;servers(3),
;;;;;--;applications(4)
-- }
MAX-ACCESS; read-create
STATUS;;;current
DESCRIPTION
"The type of aggregation being performed for this set of
reports.
If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
then this object should be set by the agent to the value
of the apmReportControlAggregationType object.
This object may not be modified if the associated
tpmAggrReportCntrlStatus object is equal to active(1)."
::= { tpmAggrReportCntrlEntry 4 }
tpmAggrReportCntrlInterval OBJECT-TYPE
SYNTAX;;;Unsigned32
UNITS;;;;"Seconds"
MAX-ACCESS; read-create
STATUS;;;current
DESCRIPTION
"The interval in seconds over which data is accumulated before
being aggregated into a report in the tpmAggrReportTable.
All reports with the same tpmAggrReportCntrlIndex will be
based on the same interval.
If the tpmAggrReportCntrlApmCntrlIndex is non-zero,
then this object should be set by the agent to the value
of the apmReportControlControlInterval object.
This object may not be modified if the associated
tpmReportAggregateCntrlStatus object is equal to active(1)."
DEFVAL { 3600 }
::= { tpmAggrReportCntrlEntry 5 }
tpmAggrReportCntrlReqSize OBJECT-TYPE
SYNTAX;;;Unsigned32