6509NAT示例

Console> (enable) show config all
begin
!
# ***** ALL (DEFAULT and NON-DEFAULT) CONFIGURATION *****
!
!
#time: Sun Oct 21 2001, 21:36:49
!
#version 6.2(2)
!
set passWord $2$FMFQ$HfZR5DUszVHIRhrz4h6V70
set enablepass $2$FMFQ$HfZR5DUszVHIRhrz4h6V70
set prompt Console>
set length 24 default
set logout 20
set config mode binary
set banner motd ^C^C
!
#test
set test diaglevel minimal
!
#errordetection
set errordetection inband disable
set errordetection memory disable
set errordetection portcounter enable
!
#system
set system baud 9600
set system modem disable
set system name
set system location
set system contact
set system countrycode
set traffic monitor 100
set system highavailability disable
set system highavailability versioning disable
set system core-dump disable
set system core-file slot0:crashinfo
set feature log-command enable
set feature supmon enable
!
#power
set power redundancy enable
!
#frame distribution method
set port channel all distribution ip both
!
#mac address redUCtion
set spantree macreduction disable
!
#default portcost mode
set spantree defaultcostmode short
!
#snmp
set snmp community read-only public
set snmp community read-write private
set snmp community read-write-all secret
set snmp rmon disable
set snmp rmonmemory 85
set snmp trap disable module
set snmp trap disable chassis
set snmp trap disable bridge
set snmp trap disable repeater
set snmp trap disable vtp
set snmp trap disable auth
set snmp trap disable ippermit
set snmp trap disable vmps
set snmp trap disable entity
set snmp trap disable config
set snmp trap disable stpx
set snmp trap disable syslog
!
#tacacs+
set tacacs attempts 3
set tacacs directedrequest disable
set tacacs timeout 5
!
#radius
set radius deadtime 0
set radius timeout 5
set radius retransmit 2
!
#kerberos
!
#authentication
set authentication login tacacs disable console
set authentication login tacacs disable telnet
set authentication login tacacs disable http
set authentication enable tacacs disable console
set authentication enable tacacs disable telnet
set authentication enable tacacs disable http
set authentication login radius disable console
set authentication login radius disable telnet
set authentication login radius disable http
set authentication enable radius disable console
set authentication enable radius disable telnet
set authentication enable radius disable http
set authentication login local enable console
set authentication login local enable telnet
set authentication login local enable http
set authentication enable local enable console
set authentication enable local enable telnet
set authentication enable local enable http
set authentication login kerberos disable console
set authentication login kerberos disable telnet
set authentication login kerberos disable http
set authentication enable kerberos disable console
set authentication enable kerberos disable telnet
set authentication enable kerberos disable http
set authentication login attempt 3 console
set authentication login attempt 3 telnet
set authentication login lockout 0 console
set authentication login lockout 0 telnet
set authentication enable attempt 3 console
set authentication enable attempt 3 telnet
set authentication enable lockout 0 console
set authentication enable lockout 0 telnet
!
#stp mode
set spantree mode pvst+
!
#vtp
set vtp domain hbu
set vtp mode server
set vtp v2 disable
set vtp pruning disable
set vtp pruneeligible 2-1000
clear vtp pruning 1001-1005
set vlan 1 name default type ethernet mtu 1500 said 100001 state active
set vlan 99 name wh type ethernet mtu 1500 said 100099 state active
set vlan 101 name xinzhongxin type ethernet mtu 1500 said 100101 state active
set vlan 102 name laozhongxin type ethernet mtu 1500 said 100102 state active
set vlan 103 name chukou type ethernet mtu 1500 said 100103 state active
set vlan 510 name 02x type ethernet mtu 1500 said 100510 state active
set vlan 511 name 02d type ethernet mtu 1500 said 100511 state active
set vlan 512 name 04x type ethernet mtu 1500 said 100512 state active
set vlan 513 name 06x type ethernet mtu 1500 said 100513 state active
set vlan 514 name 06d type ethernet mtu 1500 said 100514 state active
set vlan 515 name 09x type ethernet mtu 1500 said 100515 state active
set vlan 516 name 09d type ethernet mtu 1500 said 100516 state active
set vlan 517 name 12x type ethernet mtu 1500 said 100517 state active
set vlan 518 name 12d type ethernet mtu 1500 said 100518 state active
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state acti
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active s
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state act
set dot1q-all-tagged disable
!
#ip
set feature mdg enable
set feature psync-recovery no-powerdown
set interface sc0 1 10.186.240.100/255.0.0.0 10.255.255.255
set interface sc0 up
set interface sl0 0.0.0.0 0.0.0.0
set interface sl0 up
set arp agingtime 1200
set ip redirect enable
set ip unreachable enable
set ip fragmentation enable
set ip alias default 0.0.0.0
!
#command alias
!
#vmps
set vmps server retry 3
set vmps server reconfirminterval 60
set vmps downloadmethod tFTP
set vmps downloadserver 0.0.0.0 vmps-config-database.1
set vmps state disable
!
#rcp
set rcp username
!
#dns
set ip dns disable
!
#spantree
#uplinkfast groups
set spantree uplinkfast disable
#backbonefast
set spantree backbonefast disable
#portfast
set spantree portfast bpdu-guard disable
set spantree portfast bpdu-filter disable
#bpdu-skewing
set spantree bpdu-skewing disable
#vlan 1003
set spantree enable 1003
set spantree fwddelay 4 1003
set spantree hello 2 1003
set spantree maxage 10 1003
set spantree priority 32768 1003
#vlan 1005
set spantree enable 1005
set spantree fwddelay 4 1005
set spantree hello 2 1005
set spantree maxage 10 1005
set spantree priority 32768 1005
#vlan(defaults)
set spantree enable 1,99,101-103,510-518
set spantree fwddelay 15 1,99,101-103,510-518
set spantree hello 2 1,99,101-103,510-518
set spantree maxage 20 1,99,101-103,510-518
set spantree priority 32768 1,99,101-103,510-518
!
#syslog
set logging console enable
set logging telnet enable
set logging server disable
set logging level cdp 4 defa